



	Manuals Contents Previous Next

Top Page > Copy and Document Server Reference > Basic Copying > Copying from the Bypass Tray > Copying onto OHP Transparencies or Thin Paper

Copying onto OHP Transparencies or Thin Paper

When copying onto OHP transparencies or thin paper, select the type and size of paper.

We recommend that you use specified OHP transparencies.
Do not use color OHP transparencies that are coated with materials that might melt.
OHP transparencies must be loaded face down in the tray.
When copying onto OHP transparencies, remove copied sheets one by one.

Press [Bypass], and then press the [] key.
Press [Paper Type].
Select [OHP (Transparency)] or [Thin Paper], and then press [OK].
Specify the paper size.
Press [OK].
Place the originals, and then press the [Start] key.

Printing on special paper such as OHP transparencies and thin paper may be slower than printing on plain paper.
To prevent multiple sheets from being fed at once, fan paper before placing it on the tray.
Load OHP transparencies one by one if they jam when loaded together.