Skip headerimage
ManualsContentsPreviousNextHelp

Basic Procedure

This section describes the basic procedure for making copies.

Important

The following procedure explains copying onto paper whose size and orientation matches that of the originals exactly.

  1. Make sure "Ready" appears on the screen.

    If any other function is displayed, press the [Copy] key under the display panel on the left side of the control panel.

    Initial copy screen

    Operation panel screen illustration

  2. Make sure no previous settings remain.

    When there are previous settings remaining, press the [Clear Modes] key.

  3. Select the paper tray containing the paper that is the same size and orientation as the originals.

  4. Make sure that [Use Paper Tray Settg] is selected.

    When [Use Paper Tray Settg] is selected, the paper size and orientation of the tray you have selected will appear in Original Settng.

  5. Specify the copy settings you require.

  6. Enter the number of copies with the number keys.

    The maximum copy quantity that can be set is 999.

  7. Place the originals.

  8. Press the [Start] key.

    The machine starts copying.

    When placing originals on the exposure glass, press the [Sharp] key after all originals are scanned.

  9. When the copy job is finished, press the [Clear Modes] key to clear the settings.

Note

Reference

Related topics

Interrupt Copy
Auto Start
Job Preset