Original Orientation

Specify a readable or unreadable orientation according to the orientation of the originals. If you do not specify the orientation of the originals correctly, some functions might not make copies how you want them.

The default setting is unreadable orientation.

When using the exposure glass, place the original face down. When using the ADF, place it face up.

• Unreadable orientation

  When originals cannot be placed in the readable orientation (e.g. A4 or 8¹/₂ × 11), place them in unreadable orientation. You can make copies how you want.

  

  1. ADF

  2. Exposure glass

• Readable orientation

  Select this mode when the original orientation is the same as the copy paper orientation.

  

  1. ADF

  2. Exposure glass

When using functions such as Duplex and Combine, take care to specify the orientation of the originals correctly.

For example, the following diagram shows how to copy A4 or 8¹/₂ × 11 originals when the Combine function is selected: