![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Use the following command to display network interface board settings:
telnet : Use the "show" command.
Protocol Up/Down
The following protocols are displayed ("Up" indicates enabled; "Down" indicates disabled):.
IPv4, IPv6, IPsec, NetWare, SMB
Device Up/Down
The following devices are displayed ("Up" indicates enabled; "Down", indicates disabled):.
Parallel, USB
Ethernet interface
Displays the Ethernet speed.
Syslog priority
"LOG_INFO" is displayed.
NVRAM version
Displays the NVRAM version.
Device name
Displays the device name.
Comment
Displays the comment(s).
Location
Displays the location of the device.
Contact
Displays the contact details.
Soft switch
Displays the soft switch.
TCP/IP
The following items are displayed: ("Up" indicates enabled; "Down", indicates disabled):.
Mode (IPv4)
Mode (IPv6)
ftp, lpr, rsh, diprint, web, http, ftpc, snmp, ipp, autonet, Bonjour, ssl, nrs, rfu, nbt, ssdp, ssh, sftp, WSD (Device), WSD (Printer), WSD (Scanner), rhpp
IPv4
DHCP, Address, Netmask, Broadcast, Gateway
IPv6
Stateless, Manual, Gateway, DHCPv6-lite, DUID, DHCPv6 option lifetime
IPsec
Manual Mode, Excluded Protocol (https, dns, dhcp, wins)
EncapType
Host name
DNS Domain
Access Control
IPv4: Access Entry [1]-[5]
IPv6: Access Entry [1]-[5]
SNTP Server
Time Zone
SNTP Server polling time
SYSLOG server
Home page URL1
Home page link name1
Home page URL2
Home page link name2
Help page URL
RHPP Port
RHPP timeout
NetWare
The following items are displayed:
EncapType
RPRINTER number
Print server name
File server name
Context name
Switch
Mode, NDS/Bindery, Packet negotiation, Login Mode
Print job timeout
Protocol
SAP interval time
NDS Tree Name
Transfer Protocol
SMB
The following items are displayed:
Switch
Mode, Direct print, Notification
Workgroup name
Computer name
Comment
Share name [1]
Protocol
Wireless LAN
The following items are displayed:
Host name, Communication Mode, SSID, Channel, Security, WEP Authentication, WEP Encryption key number, WEP Encryption keys [1]-[4], WPA Encryption, WPA Authentication, Pre-Shared Key, User name, Domain name, EAP Type, Password, Phase 2 user name, Phase 2 Method TTLS, Phase 2 Method PEAP, Server cert., Intermediate CA, Server ID, Sub domain, Mic check
Ethernet
The following item is displayed:
802.1X Authentication
DNS
The following items are displayed:
IPv4
Server [1]-[3], Selected IPv4 DNS Server
IPv6
Server [1]-[3], Selected IPv6 Dns Server, Resolver Protocol
Domain name
The following items are displayed:
ether, wlan
DDNS
The following items are displayed:
ether, wlan
WINS
The following items are displayed:
ether
Primary WINS, Secondary WINS
wlan
Primary WINS, Secondary WINS
SSDP
The following items are displayed:
UUID, Profile, TTL
UPnP
The following item is displayed:
URL
Bonjour
The following items are displayed:
Computer Name (cname), Local Hostname (ether), Local Hostname (wlan), Location, Priority (diprint), Priority (lpr), Priority (ipp), IP TTL, LinkLocal Route for Multi I/F, IPP Port
SNMP
The following items are displayed:
SNMPv1v2, SNMPv3, protocol, v1Trap, v2Trap, v3Trap, SNMPv1v2 Remote Setting, SNMPv3 Privacy
ssh
The following items are displayed:
Compression, Port, TimeOut, LoginTimeOut
AuthFree
The following items are displayed:
IPv4
AuthFree Entry [1]-[5]
IPv6
AuthFree Entry [1]-[5]
Parallel
USB
LPR
The following items are displayed:
lprm check host, lpr prnerrchk
Certificate
The following item is displayed:
Verification
WS-MFP
The following items are displayed:
Network Device Name, Comments, Location, Presentation URL, WSD (Device) TCP Port, WSD (Printer) TCP Port, WSD (Printer) Job Timeout, WSD (Scanner) TCP Port, MetadataVersion, UUID
IEEE 802.1X
The following items are displayed:
User name, Domain name, EAP Type, Password, Phase 2 user name, Phase 2 Method TTLS, Phase 2 Method PEAP, Server cert, Intermediate CA, Server ID, Sub domain
Shell mode
"User mode" is displayed.