This section describes specifications for the main unit of type 3 and 4.
Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Laser beam scanning and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Induction Heating (IH) fusing
Resolution:
Scanning originals: 600 dpi
Copying: 600 dpi
Printing: 200 dpi/300 dpi/400 dpi/600 dpi/1200 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23°C (73°F), rated voltage):
Type 3: 22 seconds
Type 4: 36 seconds
Originals:
Sheet/book/objects
Maximum original size:
A3, 11 × 17
Paper size:
Tray 1:
A4, 81/2 × 11, A5, B5 JIS
Tray 2:
A3, A4, A5, B4 JIS, B5 JIS,
11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2,
8K, 16K, 11 × 15, 10 × 14, 41/8 × 91/2, C5 Env
Tray 2 (custom size):
Vertical: 182.0 297.0 mm (7.17 11.69 inches)
Horizontal: 148.0 432.0 mm (5.83 17.00 inches)
Bypass tray:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2, 51/2 × 81/2,
41/8 × 91/2, 37/8 × 71/2, C5 Env, C6 Env, DL Env, 8K, 16K, 12 × 18, 11 × 15, 10 × 14
Bypass tray (custom size):
Vertical: 90.0 305.0 mm (3.55 12.00 inches)
Horizontal: 148.0 600.0 mm (5.83 23.62 inches)
Duplex:
A3, A4, A5, A6, B4 JIS, B5 JIS, B6 JIS,
11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/4 × 14, 81/4 × 13, 8 × 13, 8 × 10, 71/4 × 101/2,
8K, 16K, 11 × 15, 10 × 14
Paper weight:
Paper trays: 60 256 g/m2 (16 lb. Bond 140 lb. Index)
Bypass: 60 300 g/m2 (16 lb. Bond 110 lb. Cover)
Duplex: 60 169 g/m2 (16 lb. Bond 90 lb. Index)
For details about and recommendations concerning thick paper, see “Thick Paper”.
Non-reproduction area (Copier):
Leading edge: 2.7 5.7 mm (0.11 0.23 inches)
Trailing edge: 0.5 6.0 mm (0.02 0.24 inches) (3.0 6.0 mm (0.12 0.24 inches) in Duplex mode)
Left and right edges: 0.5 4.0 mm (0.02 0.16 inches)
First copy/print time:
Type 3:
Full Colour: 5.9 seconds
B&W: 3.7 seconds
Type 4:
Full Colour: 5.0 seconds
B&W: 3.1 seconds
(A4, 81/2 × 11, 100% reproduction, feeding from tray 1, on the exposure glass)
Copy/print speed (Full Colour / B&W):
Type 3: 45 sheets/minute (A4, 81/2 × 11)
Type 4: 55 sheets/minute (A4, 81/2 × 11)
Reproduction ratio:
Preset reproduction ratios:
Enlargement: 400%, 200%, 141%, 122%, 115%
Full size: 100%
Reduction: 93%, 82%, 75%, 71%, 65%, 50%, 25%
Zoom: From 25 to 400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1, 2: 550 sheets
Bypass tray: 100 sheets
Power source:
220 240 V, 50/60 Hz, 8 A
Please be sure to connect the power cord to a power source as above. For details about power source, see “Power Connection”.
Power consumption:
Models that can be fitted with the optional ARDF or exposure glass cover:
Main unit only
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
About 181 W |
About 181 W |
During printing |
About 965 W |
About 1,069 W |
Maximum |
About 1.7 kW |
About 1.7 kW |
Complete system
Type 3 |
Type 4 |
|
---|---|---|
Maximum |
About 1.7 kW |
About 1.7 kW |
The complete system consists of the main unit, ARDF, internal tray 2 (1 bin tray), lower paper trays, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3020.
Models equipped with the one-pass duplex scanning ADF:
Main unit only
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
About 190 W |
About 190 W |
During printing |
About 982 W |
About 1,069 W |
Maximum |
About 1.7 kW |
About 1.7 kW |
Complete system
Type 3 |
Type 4 |
|
---|---|---|
Maximum |
About 1.7 kW |
About 1.7 kW |
The complete system consists of the main unit, internal tray 2 (1 bin tray), lower paper trays, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3020.
Dimensions:
Models that can be fitted with the optional ARDF or exposure glass cover (W × D × H up to exposure glass): 670 × 677 × 760 mm (26.4 × 26.7 × 30.0 inches)
Models equipped with the one-pass duplex scanning ADF (W × D × H up to one-pass duplex scanning ADF): 670 × 677 × 930 mm (26.4 × 26.7 × 36.6 inches)
Space for main unit (W × D):
1,065 × 677 mm (42.0 × 26.7 inches)
Noise emission:
Sound power level:
Main unit only
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
Less than 39.2 dB (A) |
Less than 40.0 dB (A) |
Copying |
Less than 65.7 dB (A) |
Less than 67.3 dB (A) |
Complete system
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
Less than 39.5 dB (A) |
Less than 39.7 dB (A) |
Copying |
Less than 72.7 dB (A) |
Less than 73.6 dB (A) |
Sound pressure level:
Main unit only
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
Less than 28.6 dB (A) |
Less than 27.7 dB (A) |
Copying |
Less than 53.2 dB (A) |
Less than 54.5 dB (A) |
Complete system
Type 3 |
Type 4 |
|
---|---|---|
Stand-by |
Less than 27.2 dB (A) |
Less than 27.5 dB (A) |
Copying |
Less than 58.2 dB (A) |
Less than 59.1 dB (A) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system of models that can be fitted with the optional ARDF or exposure glass cover consists of the main unit, ARDF, internal tray 2 (1 bin tray), lower paper trays, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3020.
The complete system of models equipped with the one-pass duplex scanning ADF consists of the main unit, internal tray 2 (1 bin tray), lower paper trays, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3020.
Weight:
Models that can be fitted with the optional ARDF or exposure glass cover: approx. 110 kg (242.6 lb.)
Models equipped with the one-pass duplex scanning ADF: approx. 133 kg (293.3 lb.)