Skip header
 

Top Page > About This Machine > Adding Paper > Changing the Paper Size

Changing the Paper Size

This section describes how to change the paper size.

CAUTION

  • When loading paper, take care not to trap or injure your fingers.

Important

  • Do not stack paper over the limit mark.

  • Tray 1, Tray 3 (LCT), and the large capacity tray (LCT) can hold A4Portrait paper only. If you want to print on any of the following paper sizes from these trays, contact your service representative:

    • Tray 1: A5Portrait, B5 JIS Portrait, 8 1/2 × 11Portrait

    • Tray 3 (LCT): 8 1/2 × 11Portrait

    • Large capacity tray (LCT): B5 JIS Portrait, 8 1/2 × 11Portrait

Note

  • Be sure to select the paper size with User Tools. If you do not, misfeeds might occur. For details about Tray Paper Size, see “System Settings”, Network and System Settings Reference.

  • Fan the paper before loading.

  • Straighten curled or warped paper before loading.

  • For details about paper sizes and types, see “Recommended Paper Sizes and Types”.

Reference

Related topics

Changing the Paper Size in Trays 2 - 4
Changing the Paper Size in the Small Size Paper Tray
Changing to a Size That Is Not Automatically Detected