![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
If you receive a document that is longer than the paper in the tray, the machine usually prints it on two pages. If you turn this function on, the machine reduces the width and length of the received image so that it will fit on one page.
If A4 paper but not B4 paper is loaded and a B4 document is received, the machine automatically reduces the document size so that it can be printed onto a single A4 sheet.
Similarly, if B4 paper but not A3 paper is loaded and an A3 document is received, the machine automatically reduces the document size so that it can be printed onto a single B4 sheet.
You can turn this function on or off with the User Parameter (switch 10, bit 3) in the Facsimile Features menu. See “Parameter Settings”.
When this function is used, the printing quality may not be as good as usual.
To split a document into two sheets without using this function, see “Page Separation and Length Reduction”.