![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
Place originals on the exposure glass.
Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
Lift the exposure glass cover or ADF.
Be sure to lift the exposure glass cover or ADF by more than 30 degrees. Otherwise, the size of the original might not be detected correctly.
Place the original face down on the exposure glass. The original should be aligned to the rear left corner.
Start with the first page to be copied.
Positioning mark
Lower the exposure glass cover or ADF.
When you place a thick book or three-dimensional original on the exposure glass and lower the ADF, the back side of the ADF rises up to accommodate the original. Keep your hands away from the hinges at the back of the ADF when you close it.
For details about how to specify the original size, see “Specifying Original Sizes”.
When the Sort, Combine, or 1 Sided 2 Sided function has been set, press the [
] key after all originals have been scanned.