Placing Originals

To correctly display the top/bottom orientation of the scanned original on a client computer, the placement of the original and the settings made on the control panel must match.

Place originals correctly by referring to the following tables:

Exposure Glass

Place the original face down on the exposure glass in either the left-right (landscape) or up-down (portrait) orientation.

Original orientation and control panel key selection
Original orientation	Control panel key
top edge touches rear of exposure glass
top edge touches top left corner of exposure glass

ADF

Hold the original so that its text is in the natural readable orientation, and then place it face up in the ADF.

Original orientation and control panel key selection
Original orientation	Control panel key
top edge touches rear of ADF
top edge placed first

When you specify full color, gray scale, or [Auto Colour Select] for Original Type, and single page TIFF/JPEG or multi-page TIFF is selected as the file type, refer to the tables below for how to place originals. Originals placed in orientations that are not recommended in the table might appear incorrectly top/bottom oriented on client computer displays. Whether you are scanning one-sided or two-sided originals, set the originals in the orientations specified in the tables below.

Exposure glass
Original orientation	Control panel key
top edge touches top left corner of exposure glass

ADF
Original orientation	Control panel key
top edge placed first