Stamp
This section explains the procedure for stamping originals that are scanned from the ARDF. The stamp indicates the originals have been scanned.
When scanning a document using ARDF, the machine can stamp a circle mark at the bottom of the original. When scanning a two-sided document, the document is marked at the bottom of the front page and top of the rear page.
This function is useful when you want to distinguish scanned originals.
One-pass duplex scanning ADF does not support the Stamp function.
Press [Original Feed Type].
Press [Stamp].
Press [OK].
The stamp position varies depending on the machine type.
Last pages are stamped even if you selected not to scan the last page.
Stamping may continue if scanning is interrupted, depending on the cause of interruption.
Replace the stamp cartridge when stamp begins to fade. For details, see "Replacing the Stamp Cartridge", About This Machine.
