Skip header
ManualsContentsPreviousNextHelp

Installing the PostScript 3 Printer Driver (Windows XP, Windows Server 2003 / 2003 R2)

This section explains how to install the PostScript 3 printer driver under Windows XP or Windows Server 2003 /2003 R2 for use over a parallel port.

Important

  1. Quit all applications currently running.

  2. Insert the CD-ROM into the CD-ROM drive.

    The installer starts.

  3. Select an interface language, and then click [OK].

    The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.

  4. Click [PostScript 3 Printer Driver].

    Add Printer Wizard starts.

  5. Click [Next >].

  6. Click [Local printer attached to this computer], and then click [Next >].

  7. Select the port you want to use, and then click [Next >].

    A dialog box for selecting the machine manufacturer and model name appears.

  8. Select the name of the machine whose driver you want to install, and then click [Next >].

  9. Change the machine name if you want, and then click [Next >].

    Select [Yes] to configure the machine as default.

  10. Select whether or not to share the machine, and then click [Next >].

  11. Specify whether or not to print a test page, and then click [Next >].

  12. Click [Finish].

    If the [Hardware Installation] message appears, click [Continue Anyway].

Note