Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server 2008 - TCP/IP)

This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows Server 2008 for use on the SmartDeviceMonitor for Client port.

Manage Printers permission is required to install the driver. Log on as an Administrators group member.
You can install the printer driver from the CD-ROM provided with this machine or download it from the manufacturer's Web site.
If you are using the 64-bit version of an operating system, download the printer driver from the manufacturer's Web site. Select this machine and the operating system you are using, and then download it.

Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Add a local printer].
Click [Create a new port:], and then select [SmartDeviceMonitor] in [Type of port:].
Click [Next].
Click [TCP/IP], and then click [Search].
A list of machines using TCP/IP appears.
Select the machine you want to use, and then click [OK].
Only machines that respond to a broadcast from the computer appear. To use a machine not listed here, click [Specify Address], and then enter the IP address or host name of the machine.
Check that the name of the machine whose driver you want to install is selected, and then click [Next].
Change the machine name if you want, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this driver software anyway].
Specify whether or not to share the machine, and then click [Next].
Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.

To stop installation of the selected driver, click [Cancel] before installation is complete.
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or [Continue] to allow the auto play program to run.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.