Skip header
ManualsContentsPreviousNextHelp

Top Page > About This Machine > Adding Toner and Staples > Replacing the Stamp Cartridge > Replacing the Stamp Cartridge of Type 3 and 4

Replacing the Stamp Cartridge of Type 3 and 4

  1. Open the ARDF cover.

    Auto document feeder illustration

  2. Raise lever P2, and then pull open cover P2.

    Auto document feeder illustration

  3. Push on the area of cover P3 marked “PUSH”, and then open the cover P3.

    Auto document feeder illustration

  4. Pull out the old stamp cartridge.

    Auto document feeder illustration

  5. Insert the new stamp cartridge.

    Push in the cartridge until the metal parts are no longer visible.

    Auto document feeder illustration

  6. Close cover P3, P2, and the ARDF cover.

Note

TopPreviousNext
Copyright (C) 2010