Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
This section describes the size and thickness limitations that apply to originals placed on the exposure glass or the ADF.
Original sizes and thickness (Type 1 and 2)
Where original is set |
Acceptable original size |
Maximum number of sheets |
Paper thickness |
|---|---|---|---|
Exposure glass |
Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm) |
1 sheet |
|
ADF, one-sided original |
A5 (up to 1200 mm long) 51/2 × 81/2 |
50 sheets: Less than 80 g/m2 (20 lb. Bond)*1 |
40-128 g/m2 (11-34 lb. Bond) |
ADF, two-sided original |
A5 (up to 432 mm long) 51/2 × 81/2 |
50 sheets: Less than 80 g/m2 (20 lb. Bond)*1 |
52-105 g/m2 (14-28 lb. Bond) |
*1 Above specification depends on the paper type and condition
Original sizes and thickness (Type 3 and 4)
Where original is set |
Acceptable original size |
Maximum number of sheets |
Paper thickness |
|---|---|---|---|
Exposure glass |
Up to A3 (297 × 420 mm), 11 × 17 (279 × 432 mm) |
1 sheet |
|
ADF, one-sided original |
B6 JIS (up to 1200 mm long) 51/2 × 81/2 |
100 sheets: Less than 80 g/m2 (20 lb. Bond)*1 |
40-128 g/m2 (11-34 lb. Bond) |
ADF, two-sided original |
A5 (up to 432 mm long) 51/2 × 81/2 |
100 sheets: Less than 80 g/m2 (20 lb. Bond)*1 |
52-128 g/m2 (14-34 lb. Bond) |
*1 Above specification depends on the paper type and condition
The weight range for originals in the Mixed Original Sizes mode is 52 - 80 g/m2 (14 - 20 lb. Bond).
 |
 | Copyright (C) 2010 |
to A3