Batch Mode

Using Batch mode, you can copy an original that is too large to place in the ADF by placing it in the ADF in sections (batches). The original will be scanned and stored as a single document.

Place special originals, such as translucent paper, one by one.

The maximum numbers of sheets you can load in the ADF are as follows:

Type 1 and 2: 50 sheets
Type 3 and 4: 100 sheets

Press [Special Original].
Select [Batch], and then press [OK].
Place the first part of the original, and then press the [Start] key.
After the first part of the original has been fed, place the next part, then press the [Start] key.

When [SADF] is displayed instead of [Batch], specify the Batch mode under Switch to Batch in User Tools. For details about Switch to Batch, see “Input / Output”.
To copy subsequent originals in this mode, repeat step 4.
When the Sort, Combine or 1 Sided 2 Sided function has been set, press the [] key after all originals have been scanned.
You cannot switch between 1-sided and 2-sided originals during copying.

Input / Output