Příkaz "etherconfig" použijte pro zobrazení a konfiguraci parametrů Ethernet.
Nastavení zobrazení
msh> etherconfig
Zadejte rychlost Ethernet
msh> etherconfig speed {auto|10f|10h|100f|100h}
auto=Auto Select
10f=10 Mb/s Full Duplex
10h=10 Mb/s Half Duplex
100f=100 Mb/s Full Duplex
100h=100 Mb/s Half Duplex
Výchozí nastavení je "auto".