



	Manuals Contents Previous Next

Top Page > Troubleshooting > Remarks > Where to Put Your Machine > Machine Environment > Optimum environmental conditions

Optimum environmental conditions

This section describes precautions when locating the machine.

Do not use flammable sprays or solvents in the vicinity of this machine. Doing so could result in fire or electric shock.

Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.

Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Do not place heavy objects on the machine. Doing so can cause the machine to topple over, possibly resulting in injury.

Temperature: 10-32 °C (50-89.6 °F) (humidity to be 54% at 32 °C, 89.6 °F)
Humidity: 15-80% (temperature to be 27 °C, 80.6 °F at 80%)
A strong and level base.
The machine must be level within 5 mm, 0.2 inches: both front to rear and left to right.
To avoid possible buildup of ozone, make sure to locate this machine in a large well ventilated room that has an air turnover of more than 30 m³/hr/person.