Loading cover sheets

This section describes how to load cover sheets into the interposer of the perfect binder.

Load paper in the orientation.
Do not place anything on top of or leave documents on the sensor. This may lead to the paper size not being correctly detected or paper jams.

While lightly pinching the side fence, align it with the paper size to be loaded.
Load paper face up and neatly stacked. Slide the side fence tightly against the loaded paper.

There are two trays on the interposer of the perfect binder. Each tray can hold up to 200 sheets of paper. Do not stack paper over the limit mark.
When loading thick paper of 251 g/m² (140 lb. Index) or heavier in the interposer trays of the perfect binder, make sure the grain of the paper is perpendicular to the feed direction.
If you are loading sheets that are likely to stick together (such as sheets of coated paper), be sure to fan them thoroughly before loading. Fanning them will help prevent jams and allow them to be fed in one sheet at a time.
The perfect binding process may scratch glossy paper.