Adding Toner

This section describes how to add and store toner.

Do not incinerate toner (new or used) or toner containers. Doing so risks burns. Toner will ignite on contact with naked flame.

Do not store toner (new or used) or toner containers anywhere near naked flames. Doing so risks fire and burns. Toner will ignite on contact with naked flame.

If toner or used toner is inhaled, gargle with plenty of water and move into a fresh air environment. Consult a doctor if necessary.

If toner or used toner gets into your eyes, flush immediately with large amounts of water. Consult a doctor if necessary.

If toner or used toner is swallowed, dilute by drinking a large amount of water. Consult a doctor if necessary.

When removing jammed paper or replacing toner, avoid getting toner (new or used) on your skin. If toner comes into contact with your skin, wash the affected area thoroughly with soap and water.

When removing jammed paper or replacing toner, avoid getting toner (new or used) on your clothing. If toner comes into contact with your clothing, wash the stained area with cold water. Hot water will set the toner into the fabric and make removing the stain impossible.

Do not crush or squeeze toner containers. Doing so can cause toner spillage, possibly resulting in dirtying of skin, clothing, and floor, and accidental ingestion.

Fault may occur if you use toner other than the recommended type.
When adding toner, do not turn off the operation switch. If you do, settings will be lost.
Always add toner when the machine instructs you.
Do not use recycled toner. This will damage the machine.
During toner adding, the toner container is rotating. Do not touch the toner container.
If toner remains in the container, you cannot remove the container. Do not remove the container forcibly.
Store toner containers in a cool, dry place free from direct sunlight.
Store toner on a flat surface.

You can still make about 2,000 prints after the messages “Toner Cartridge is empty.” and “Replace the cartridge.” appear cyclically, but replace toner soon to prevent poor print quality.
You can check name of the required toner and the replacement procedure using the “Toner Cartridge is empty.” screen.
You can change the toner containers during printing.
If toner remains in the container, you cannot pull it out.
Press [System Status] to check contact number where you can order supplies. See "Checking Machine Status and Settings".
You can add all four color toners in the same way.