Skip headerPro C901
ManualsContentsPreviousNextHelp

Top Page > Network Guide > Monitoring and Configuring the Machine > Machine Status Notification by E-Mail > Setting the Account for E-mail Notification

Setting the Account for E-mail Notification

Before you use Auto E-mail Notification or On-demand E-mail notification, setup an e-mail account to be used for the function. Perform the following configuration task in Web Image Monitor.

  1. Log in to Web Image Monitor in administrator mode.

  2. Click [Configuration] in the menu area, and then click [E-mail] on the [Device Settings] area.

  3. Make the following settings in E-mail Notification Account:

    • E-mail Notification E-mail Address: Enter the address using alphanumeric characters. This will appear as the sender (From:) of the e-mail notification. Send requests for e-mail notification to this address.

    • Receive E-mail Notification: Specify whether to use on-demand e-mail notification.

    • E-mail Notification User Name: Enter the specified user name for the e-mail account in "E-mail Notification E-mail Address".

    • E-mail Notification Password: Enter the specified password for the e-mail account in "E-mail Notification E-mail Address".

  4. Click [OK].

  5. Click [Logout].

  6. Quit Web Image Monitor.

TopPreviousNext
Copyright (C) 2010