Configuring the Network Interface Board

Use the following command to display network interface board settings:

Item				Description
Common
	Mode
	Protocol Up/Down			Protocol Settings
		IPv4
		IPv6
		SMB
	Ethernet interface
	Syslog priority
	NVRAM version
	Device name
	Comment
	Location
	Contact
	Soft switch
TCP/IP				TCP/IP settings
	Mode(IPv4)
	Mode(IPv6)
		ftp
		rsh
		web
		http
		ftpc
		snmp
		autonet
		ssl
		nrs
		rfu
		nbt
		ssdp
		ssh
		sftp
	IPv4
		DHCP
		Address
		Netmask
		Broadcast
		Gateway
	IPv6
		Stateless
		Manual
		Gateway
		DHCPv6-lite
		DUID
		DHCPv6 option lifetime
	EncapType
	Host name
	DNS Domain
	Access Control			Access Control settings
		IPv4		X can be set between 1 and 5.
			AccessEntry [X]
		IPv6
			AccessEntry [X]	X can be set between 1 and 5.
	Time server			Time settings
	Time Zone
	Time server polling time
	SYSLOG server			Websys settings
	Home page URL1
	Home page link name1
	Home page URL2
	Home page link name2
	Help page URL
SMB				SMB settings
	Switch
		Mode
		Direct print
		Notification
	Workgroup name
	Computer name
	Comment
	Share name[1]
	Protocol
DNS				DNS settings
	IPv4
		Server[X]		X can be set between 1 and 3.
		Selected IPv4 DNS Server
	IPv6
		Server[X]		X can be set between 1 and 3.
		Selected IPv6 DNS Server
	Resolver Protocol
Domain name
	ether
DDNS
	ether
WINS				WINS settings
	ether
		Primary WINS
		Secondary WINS
SSDP				SSDP settings
	UUID
	Profile
	TTL
UPnP				UPnP settings
	URL
SNMP				SNMP settings
	SNMPv1v2
	SNMPv3
	protocol
	v1Trap
	v2Trap
	v3Trap
	SNMPv1v2 Remote Setting
	SNMPv3 Privacy
ssh				ssh settings
	Compression
	Port
	TimeOut
	LoginTimeOut
Certificate
	Verification
Shell mode				Remote maintenance tool mode