External Options

Trimmer

Cuts the fore edge of the book block after the book block is saddle stitched. To use the trimmer, the Booklet Finisher SR5020 is required.

Booklet Finisher SR5020

Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

• Finisher booklet tray

Finisher SR5000

Sorts, stacks, staples, and punches multiple sheets of paper. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

Stacker

Stacks 5,250 sheets of paper. You can install two stackers.

Ring binder

Binds sheets of paper with a ring comb.

Z-folding unit

Makes two parallel folds on printed paper, one of which faces in and the other facing out. To use the Z-folding unit, the Finisher SR5000 or the Booklet Finisher SR5020 is required.

Interposer

Inserts cover or slip sheets into printed paper.

Perfect binder

Perfect binds sheets into a booklet.

Buffer pass unit

Cools prints.

Fuser unit air separator

Blows air to prevent thin paper becoming jammed.

Bridge unit

Connects a Wide LCT to an additional wide LCT.

Multi bypass tray

Use to print onto thick paper, tab sheets, envelopes, and custom size paper. To use the multi bypass tray, the Wide LCT is required.

A3/11 × 17 tray unit

You can load A3 or 11 × 17 paper in tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

Wide LCT

Holds 4,400 sheets of A3 or 11 × 17 sized paper. Use to print onto adhesive labels, tab sheets, envelopes, and custom size paper.

LCT

Holds 4,550 sheets of paper.