Specifications for the Main Unit
This section describes specifications for the main unit.
Configuration:
Console
Photosensitivity type:
OPC drum
Print process:
Laser beam scanning and Electrophotographic printing
4 drums tandem method
Development:
Dry two-component magnetic brush development system
Fusing:
Oilless belt fusing
Resolution:
1200 dpi
Warm-up time (23 °C (73.4 °F), rated voltage):
420 seconds or less
Paper size:
Tray 1: A4
, 81/2 × 11Tray 2:
A3
, B4 JIS (Japanese Industrial Standard), A4, B5 JIS, A5,11 × 17
, 81/2 × 14, 81/2 × 11, 51/2 × 81/2, 81/2 × 13, 81/4 × 13, 8 × 13, 71/4 × 101/2, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/4 × 14, 8 × 10, SRA3, 12 × 18Tray 2 (custom size):
Vertical: 139.7
330.2 mm (5.50 13.00 inches)Horizontal: 182.0
458.0 mm (7.17 18.03 inches)
Duplex:
A3
, B4 JIS, A4, B5 JIS, A5,11 × 17
, 81/2 × 14, 81/2 × 11, 51/2 × 81/2, 81/2 × 13, 81/4 × 13, 8 × 13, 71/4 × 101/2, 11 × 15, 11 × 14, 10 × 15, 10 × 14, 81/4 × 14, 8 × 10, SRA3, 12 × 18Duplex (custom size):
Vertical: 139.7
330.2 mm (5.50 13.00 inches)Horizontal: 182.0
487.7 mm (7.17 19.20 inches)
Paper weight:
Trays: 60
220 g/m2 (16 lb. Bond 80 lb. Cover)Duplex: 60
220 g/m2 (16 lb. Bond 80 lb. Cover)
For details about and recommendations concerning thick paper, see “Thick Paper”.
You can use paper ranging from 60 to 300 g/m2 (16 lb. Bond 110 lb. Cover) if the Wide LCT is installed.
First print time:
Color: 13.5 seconds or less
B&W: 13.5 seconds or less
(A4
, 81/2 × 11, 100% reproduction, feeding from tray 1)
Print speed (Full Color/B&W):
90 sheets/minute (A4, 81/2 × 11)
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1 (Tandem tray): 2,200 sheets (1,100 sheets × 2)
Tray 2: 550 sheets
Power source:
208 240 V, 50/60 Hz, 24 A
Power consumption:
Main unit only |
Complete system |
|
|---|---|---|
Warm-up |
About 5.5 kW |
About 5.5 kW |
Stand-by |
About 3.2 kW |
About 3.2 kW |
During printing |
About 5.5 kW |
About 5.5 kW |
Maximum |
About 5.5 kW |
About 5.5 kW |
The complete system consists of the main unit, the Finisher SR5000, two Wide LCTs, the interposer, and the fuser unit air separator.
Dimensions (W × D × H):
1,280 × 990 × 1,640 mm (50.4 × 39.0 × 64.6 inches)
Space for main unit (W × D):
3,280 × 2,790 mm (129.2 ×109.9 inches)
Noise emission:
Sound power level:
Main unit only
Complete system
Stand-by
Less than 67 dB (A)
Less than 69 dB (A)
Printing
Less than 76 dB (A)
Less than 80 dB (A)
Sound pressure level:
Main unit only
Complete system
Stand-by
Less than 61 dB (A)
Printing
Less than 68 dB (A)
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound power level and sound pressure level are measured from the position of the bystander.
The complete system consists of the main unit, the Finisher SR5000, and the fuser unit air separator.
Weight:
630 kg (1389.0 lb.) or less
For details about the machine's printer function, see manuals provided with the printer function.
