Handling the machine's interior

This section explains safety precautions about handling the machine's interior.

Do not remove any covers or screws other than those explicitly mentioned in this manual. Inside this machine are high voltage components that are an electric shock hazard and laser components that could cause blindness. Contact your sales or service representative if any of the machine's internal components require maintenance, adjustment, or repair.
Do not attempt to disassemble or modify this machine. Doing so risks burns and electric shock. Note again that exposure to the laser components inside this machine risks blindness.

Some of this machine's internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.

Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.

During operation, rollers for transporting the paper and originals revolve. A safety device has been installed so that the machine can be operated safely. But take care not to touch the machine during operation. Otherwise, an injury might occur.

Keep your hands clear of the inside of the ring binder and the space under the ring binder tray. You can trap your fingers if you do not.

When closing the finisher, keep hands clear of the finisher's upper surface. You can trap and injure your fingers if you do not.

Keep your hands clear of the perfect binder and paper exit. You can trap your fingers if you do not.

Keep your hands clear of the inside of the stacker and the space under the stacker tray. You might trap your fingers if you do not.

If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can result from heavy accumulation of dust inside this machine. Contact your sales or service representative for details about and charges for cleaning the machine's interior.