Skip headerPro C901S
ManualsContentsPreviousNextHelp

Top Page > Troubleshooting > When the Machine Does Not Operate As Wanted > When Large Size Paper Is Not Properly Aligned > Booklet Finisher SR5020

Booklet Finisher SR5020

This section describes what to do if paper larger than B4 JIS or 81/2" × 14" is not properly aligned or falls from the finisher shift tray when using Booklet Finisher SR5020.

  1. Press the [Suspend/Resume] key.

    The key lights up.

    Finisher illustration

  2. Remove the copies/prints.

  3. Pull out the finisher shift tray's extension.

    Finisher shift tray illustration

  4. Set the auxiliary paper tray.

    Finisher shift tray illustration

  5. Press the [Suspend/Resume] key.

    The key turns off, and then copying/printing restarts.

TopPreviousNext
Copyright (C) 2010