Selecting Copy Paper

There are two ways to select copy paper:

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on original size and reproduction ratio.

Manual Paper Select

Choose the tray containing the paper you want to copy onto: paper roll tray, cut paper tray, or bypass tray

The paper sizes and orientations you can use with Auto Paper Select (when copying at a ratio of 100%) are as follows:

A0, A1, A2, A3, A4, B1 JIS, B2 JIS, B3 JIS, B4 JIS

Only the paper trays set to [Do not Display] or [Recycled Paper] in Paper Type and also set to [Yes] in Apply Auto Paper Select under Tray Paper Settings can be selected in Auto Paper Select mode. For details, see “System Settings”, Network and System Settings Reference.
If you change the paper type, copying may take longer to start.
When Auto Paper Select is selected, copying may take slightly longer since the machine selects the copy paper after scanning the original.