Using as a Windows Network Printer

This section explains how to install the PostScript 3 printer driver when using the printer as a Windows network printer.

To use the print server, install the printer driver by selecting "Network printer server", and then select the Windows 2000/XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2 shared printer.

This section assumes that the client computer has already been configured to communicate with a Windows 2000/XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2 print server. Do not begin the following procedure before the client computer is set up and configured correctly.

Procedures will vary slightly between operating systems. In this manual, Windows XP is used as a representative example of its operating system family.
Manage Printers permission is required to install the drivers. Log on as an Administrators group member.
If you print with a print server connected to the machine using the SmartDeviceMonitor for Client port, Recovery Printing and Parallel Printing cannot be used from the client computer.
If you print under Windows XP/Vista/7, Windows Server 2003/2003 R2/2008/2008 R2 print server, notification functions of SmartDeviceMonitor for Client may not be used with the client computer.
You can install the printer driver from the CD-ROM provided with this printer or download it from the manufacturer's Web site.

Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Next >] under Windows 2000/XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008, click [Add a network, wireless or Bluetooth printer].
Click [A network printer, or a printer attached to another computer] and then click [Next >] under Windows XP, Windows Server 2003/2003 R2.
Under Windows 2000, click [Network printer], and then click [Next >].
Under Windows Vista/7, Windows Server 2008, click [The printer that I want isn't listed].
Select [Browse for a printer], and then click [Next >] under Windows XP/Vista/7, Windows Server 2003/2003 R2/2008.
Under Windows 2000, select the location method from the [Locate Your Printer] screen, and then click [Next >].
Double-click the computer name you want to use as a print server under Windows 2000/XP, Windows Server 2003/2003 R2.
Select the machine you want to use, and then click [Next >].
If a security warning message appears, click [Yes].
The printer driver installation starts under Windows XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008, select your machine, and then click [Select].
If a security warning message appears, click [Install driver].
The printer driver installation starts.
Click [Next >] under Windows XP, Windows Server 2003/2003 R2/2008.
Under Windows Vista/7, Windows Server 2008, Check the machine name, and then click [Next >].
If a check box for setting the machine as a default printer appears, configure as necessary.
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this driver software anyway].
Specify whether or not to print a test page, and then click [Finish] under Windows Vista/7, Windows Server 2008.
If a check box for setting the machine as a default printer appears, configure as necessary.
If you want to print a test page, click [Print a Test Page] under Windows Vista/7.
Under Windows 2000/XP, Windows Server 2003/2003 R2, click [Finish], and then restart the computer to complete installation.

To stop installation of the selected driver, click [Cancel] before installation is complete.
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or [Continue] to allow the auto play program to run.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.