ftp

Use the "put" or "mput" command according to the number of files to be printed.

When one file is printed

ftp> put \(pass name)\(file name)

When multiple files are printed

ftp> mput \(pass name)\(file name) [\(pass name)\(file name)...]

Follow the procedure below to print using the "ftp" command.

Formulate the printer's IP address or the host name of the hosts file printer as an argument and use the "ftp" command.
% ftp printer's IP address
Enter the user name and password, and then press the [Enter] key.
For details about the user name and password, consult your network administrator.
User:
Password:
When user authentication is set, enter a login user name and password.
When printing a binary file, set the file mode to binary.
ftp> bin
When printing a binary file in ASCII mode, print may not come out correctly.
Specify files to be printed.
The following shows the examples of printing a file named "file 1" in the "C:PRINT" directory and printing file 1 and file 2.
ftp> put C:\PRINT\file1
ftp> mput C:\PRINT\file1 C:\PRINT\file2
Quit ftp.
ftp> bye

"=", ",", "_", and ";" cannot be used for filenames. File names will be read as option strings.
For "mput" command, option can not be defined.
For "mput" command, "*" and "?" can be used as wild cards in file names.
When printing a binary file in ASCII mode, print may not come out correctly.