Using the IPP Port

This section explains how to install the PostScript 3 printer driver for use on the IPP port.

Procedures will vary slightly between operating systems. In this manual, Windows XP is used as a representative example of its operating system family.
Manage Printers permission is required to install the driver. Log on as an Administrators group member.
In an IPv6 environment, you cannot use the IPP Port. Use the SmartDeviceMonitor for Client port.
The IPP port cannot be used under Windows 2000. If you are using Windows 2000, install the PostScript 3 printer driver using the SmartDeviceMonitor for Client port. To use the SmartDeviceMonitor for Client port , you must first download SmartDeviceMonitor for Client from the manufacturer's Web site. For details about the SmartDeviceMonitor for Client port, see "Using the SmartDeviceMonitor for Client Port".
Installation of the certificate is especially necessary for users who want to print via IPP -SSL from Windows Vista/7, Windows Server 2008/2008 R2. For details, consult your administrator.
If a certificate authority issues a certificate that must be authenticated by an intermediate certificate authority , and the certificate is installed on this machine , an intermediate certificate must be installed on the client computer. Otherwise, validation by the certificate authority will not be performed correctly . If validation cannot be performed properly , a warning message informing you that installation is not possible might appear when you try to add a printer using IPP -SSL under Windows Vista/7, Windows Server 2008/2008 R2. To enable authentication from the client computer , install the intermediate certificate on the client computer, and then reestablish connection.
Intermediate certificates cannot be installed on this machine.
To print via IPP-SSL, use the SmartDeviceMonitor for Client port.

Quit all applications currently running.
On the [Start] menu, click [Printers and Faxes].
Under Windows Vista/7, Windows Server 2008, click [Control Panel] on the [Start] menu, and then click [Printers] or [Devices and Printers] in [Hardware and Sound].
Click [Add a printer].
The [Add Printer Wizard] dialog box appears.
Click [Next>] under Windows XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008, click [Add a network, wireless or Bluetooth printer].
Click [A network printer, or a printer attached to another computer] under Windows XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008, click [The printer that I want isn't listed].
Click [Next>] under Windows XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008,insert the provided CD-ROM into the computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click the [Close] button.
Click [Connect to a printer on the Internet or on a home or office network:] under Windows XP, Windows Server 2003/2003 R2.
Under Windows Vista/7, Windows Server 2008, click [Select a shared printer by name].
Enter "http:// machine's IP address/printer (or ipp)" as the machine's address, and then click [Next>].
Click [Have Disk...].
Insert the provided CD-ROM into the computer's CD-ROM drive under Windows XP, Windows Server 2003/2003 R2.
If the [AutoPlay] dialog box appears, click the [Close] button.
Click [Browse...], and then specify a location for the INF file.
If the CD-ROM drive letter is D, the printer driver's source files are stored in "D:\DRIVERS\PS\XP_VISTA\(Language)\DISK1".
Click [Open].
Click [OK] to close the Install From Disk window.
Select the machine you want to use, and then click [OK].
If the [Hardware Installation] message appears, click [Continue Anyway].
If the [Windows can't verify the publisher of this driver software] message appears, click [Install this driver software anyway].
Configure the default printer as necessary, and then click [Next >].
Click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
If installation is successful, the icon of the printer connected to the IPP port is added to the [Printers and Faxes] window.

To stop installation of the selected driver, click [Cancel] before installation is complete.

Using the SmartDeviceMonitor for Client Port