Specifications for the Main Unit

This section describes specifications for the main unit.

Configuration:

Desktop

Photosensitivity type:

OPC drum

Original scanning:

Original feed image scanning over fixed contact image sensor

Copy process:

Dry electrostatic transfer system

Development:

Dry two-component magnetic brush development system

Fusing:

Heating roll pressure system

Resolution:

600 dpi

Original reference position:

Center

Warm-up time:

Less than 2 minutes (23°C)

Originals:

Sheet

Original size (W × L):

Size that can be placed: 8¹/₂ × 7 inches 37¹/₂ × 590 inches (49.2 ft.)

Scan size: 8¹/₂ × 8¹/₂ inches 36 × 590 inches (49.2 ft.)

Copy size (W × L):

E A
Paper roll: 8¹/₂ × 7 inches 36 × 590 inches
Bypass tray: 8¹/₂ × 10 inches 36 × 78 inches
Cut paper: 12 × 18, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11

Paper weight:

51 134 g/m² (13 35 lb.)

Non-reproduction area (Copier):

Top: 0.32 inch
Bottom: 0.32 inch
Left and Right: 0.08 ± 0.08 inch (less than 0.20 inch on either side)

First copy time:

18 seconds (D, paper roll tray), 19 seconds (B, cut paper tray)

Copying speed (full-size copying):

3 copies/minute (A0 (E) ), 6 copies/minute (A1 (D) )

Reproduction ratio:

Engineering:
- Full-size: 100%
- Reduce: 25.0%, 32.4%, 50.0%, 64.7%
- Enlarge: 129.4%, 200.0%, 258.8%, 400.0%
- Zoom: 25.0 400.0% (0.1% increments)
Architecture:
- Full-size: 100%
- Reduce: 25.0%, 33.3%, 50.0%, 66.7%
- Enlarge: 133.3%, 200.0%, 266.7%, 400.0%
- Zoom: 25.0 400.0% (0.1% increments)

Maximum continuous copy run:

99 sheets

Copy paper feed method:

Bypass tray

Power source:

120V, 60Hz, 15A or more

Power consumption:

Main unit only

Machine

Stand-by

About 312 W

During printing

About 1.37 kW

Maximum

About 1.44 kW
Complete system

Machine

Maximum

About 1.44 kW

The complete system consists of the main unit, Roll Feeder Type 3601B, and Paper Cassette Type 240.

	Machine
Stand-by	About 312 W
During printing	About 1.37 kW
Maximum	About 1.44 kW

	Machine
Maximum	About 1.44 kW

Dimensions (W × D × H):

1080 × 637 × 580 mm (43 × 25 × 23 inches)

Space for main unit (W × D):

2280 × 1237 mm (89.8 × 48.8 inches)

Noise emission:

Sound power level:

Machine (Full system)

Stand-by

Less than 43 dB (A)

Copying

Less than 70 dB (A)
Sound pressure level:

Machine (Full system)

Stand-by

Less than 37 dB (A)

Copying

Less than 62 dB (A)
- Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
- Sound pressure level is measured from the position of the bystander.
- The full system consists of the main unit with the Roll Feeder Type 3601B and Paper Cassette Type 240.

	Machine (Full system)
Stand-by	Less than 43 dB (A)
Copying	Less than 70 dB (A)

	Machine (Full system)
Stand-by	Less than 37 dB (A)
Copying	Less than 62 dB (A)

Weight:

Approx. 107 kg (235.9 lb.)