Optimum environmental conditions

Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

After you move the machine, use the caster fixture to fix it in place. Otherwise the machine might move or come down to cause an injury.

Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

When new, electrical devices containing volatile materials will normally release emissions into the air of their vicinity. For this reason, for the first few days after installation of a new device, strong ventilation inside the room where it is placed is necessary.

Keep the machine away from salt-bearing air and corrosive gases. Also, do not install the machine in places where chemical reactions are likely (laboratories, etc.), as doing so will cause the machine to malfunction.

Machine sound levels exceeding LWAd > 63 dB (A) are not suitable for desk work environments, so place the machine in another room.