Preset Stamp

You can select the language of the message printed in Stamp mode.

Default: [English]

You can select the stamp type given priority when [Preset Stamp] is pressed.

Default: [COPY]

Specify how each stamp is printed.

• Stamp Position

  Specify where to print the stamp.

  Default: [Top Right]

• Adjust Stamp Position

  You can adjust the position of the stamp within the available ranges shown below.

  “Top Left” - T/B: 0.1 16.0 inches, L/R: 0.1 16.0 inches

  “Top Center” - T/B: 0.1 16.0 inches, L/R: 8.0 8.0 inches

  “Top Right” - T/B: 0.1 16.0 inches, L/R: 0.1 16.0 inches

  “Center Left” - T/B: 8.0 8.0 inches, L/R: 0.1 16.0 inches

  “Center” - T/B: 8.0 8.0 inches, L/R: 8.0 8.0 inches

  “Center Right” - T/B: 8.0 8.0 inches, L/R: 0.1 16.0 inches

  “Bottom Left” - T/B: 0.1 16.0 inches, L/R: 0.1 16.0 inches

  “Bottom Center” - T/B: 0.1 16.0 inches, L/R: 8.0 8.0 inches

  “Bottom Right” - T/B: 0.1 16.0 inches, L/R: 0.1 16.0 inches

• Size

  You can set the size of the stamp.

  Default: [1X]

• Density

  You can set the pattern used to print the stamp.

  Default: [Normal]

  • Normal

    The stamp is printed on the image. You cannot check which parts will overlap.

  • Lighter

    The image can be seen through the stamp.

  • Lightest

    The image appears even clearer than in the Lighter setting.

• Page to Stamp

  Sets whether to print the stamp on all pages or only the first page.

  Default: [All Pages]