General Features

You can set whether Auto Image Density is “On” or “Off” when the machine is turned on, reset, or modes are cleared.

Default for “Text”: [On]

Default for “Drawing”: [On]

Default for “Text / Photo”: [On]

Default for “Photo”: [Off]

Default for “Background Lines”: [On]

Default for “Patched Original”: [On]

Default for “Generation Copy”: [On]

You can specify which original photo type has priority when you select “Text / Photo” or “Photo”.

Default for “Text / Photo”: [Printed Photo]

Default for “Photo”: [Printed Photo]

The maximum copy quantity can be set between 1 and 99.

Default: [99 sheet(s)]

If you load paper of the same size in two or more trays, the machine automatically shifts to the other when the first tray runs out of paper (when Auto Paper Select is selected). This function is called “Auto Tray Switching”. This setting specifies whether or not Auto Tray Switching is used. The machine can only select loaded paper rolls with this function.

Default: [With Image Rotation]

• With Image Rotation

  Use to copy when using the Auto Tray Switching function.

• Without Image Rotation

  Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message "Load paper." is displayed.

• Off

  When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is displayed.

You can choose whether or not the beeper sounds when copying is complete.

If Panel Key Sound of User Tools (System Settings) settings is “Lowest”, “Low”, “Medium”, or “High”, the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred.

Default: [On]