Lower copy output

Do not pull out the lower output auxiliary guides when lower copy output is selected. Otherwise, copies may not be stacked properly. When it is hard to remove the copies from the lower output stacker, pull out the guides.

1. Lower output auxiliary guides

If you copy a rolled original using the lower output auxiliary guides, and lower copy output is selected for the copy output location, the original in the lower output auxiliary guides may interfere with copy output. This may damage originals or cause paper jams. In such case, select Synchro Cut.

Copies are ejected from the lower output exit onto the lower output tray, and then sent to the lower output stacker at the machine's front. Remove the copies from the stacker.

1. Lower output tray

2. Lower output guides

1. Lower output stacker

When lower copy output is specified for A1 (D) or A0 (E) size paper, attach the lower output guides to the machine.

When using thick paper, the last sheet to be ejected may remain in the output exit. If this happens, remove it.

If the optional rear stacker is installed instead of the lower output tray and if you select lower copy output, copies come out to the rear stacker at the back of the machine (Rear copy output).

1. Rear stacker