Original upper output

Originals are ejected onto the original stackers.

Check the upper output stackers are correctly installed on the top of the machine.
1. Upper output stackers
Originals are ejected onto the original stackers.
The original stackers can hold one original at a time. Remove each original after it is ejected by holding its leading edge.

If the original is larger than A1 (D), select original rear output.
If the original is heavier than 157 g/m² (41 lb.), select original rear output.
If the original is plain paper not heavier than 52 g/m² (13 lb.) or translucent paper not heavier than 80 g/m² (21 lb.), select original rear output.
When copying a rolled original, prevent it curling up on the stackers by holding its leading edge as it is ejected.