Cleaning the Registration Roller

The inside of the machine could be very hot. Do not touch the parts with a label indicating the "hot surface". Otherwise, an injury might occur.

Do not use chemical cleaners or organic solvents such as thinners or benzine.
Do not touch the belt of the roller when cleaning.
Clean the registration roller if dots (caused by specks of paper stuck to the roller) appear on printed OHP transparencies.

Turn off the power, and then unplug the power cord.
Carefully open the printer's front cover by pulling the left and right side levers.
Set the registration roller as shown.
Clean the registration roller by applying a soft damp cloth while turning it.
Carefully close the front cover.
Plug in the power cord, and then turn on the power.