This section explains about parameters that can be set on the print settings menu.
Machine Modes
Copies
Specify the number of copies to print.
If the number of copies to print is specified by command or the printer driver, this setting is overridden.
1 to 999
Page Size
Specify the default paper size.
Default:
(mainly Europe and Asia)
A4
(mainly North America)
81/2 11
The default paper size is used when the paper size is not specified in the print data.
(mainly Europe and Asia)
A4, A5, A6, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., 81/2 14, 81/2 13, 81/2 11, 81/4 13, 8 13, 71/4 101/2, 51/2 81/2, 41/8 91/2, 37/8 71/2, 16K, Custom Size
(mainly North America)
81/2 14, 81/2 13, 81/2 11, 81/4 13, 8 13, 71/4 101/2, 51/2 81/2, 41/8 91/2, 37/8 71/2, A4, A5, A6, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., 16K, Custom Size
Edge to Edge Print
Select to whether or not to print using the whole area of paper, leaving no edge borders.
Default: [Off]
On
Off
Duplex
Select whether or not to print on both sides of a sheet. When set to on, specify the binding method.
Default: [Off]
Off
Long Edge Bind
Short Edge Bind
Rotate by 180 Degrees
Select whether or not to rotate image by 180 degrees when printing.
Default: [Off]
On
Off
Blank Page Print
Select whether or not to print blank pages.
Default: [On]
On
Off
Letterhead Setting
Specify whether or not to print with the letterhead printing mode.
Default: [Auto Detect]
Off
Not printing with the letterhead printing mode.
Auto Detect
Print with the letterhead printing mode when the letterhead printing mode is selected.
On (Always)
Print with the letterhead printing mode regularly.
Tray Setting Priority
Specify whether the paper size and type settings that are applied are those specified using the control panel, printer driver, or print command.
Bypass Tray
Specify whether the paper size and type settings applied for bypass Tray are those specified using the control panel, printer driver, or print command.
Default: [Driver/Command]
Driver/Command
When the source paper tray is specified for a print job, the paper settings specified using the printer driver or by print command are applied, regardless of any settings specified using the control panel.
Machine Setting(s)
The paper settings specified on the machine's control panel are applied to all print jobs. An error will occur if the paper settings specified using the printer driver or by print command do not match those specified using the control panel.
Any Size/Type
If the machine's trays do not contain paper matching the settings of the print job, printing can proceed from the bypass tray with the job's settings applied.
Any Custom Size/Type
If the machine's trays do not contain paper matching the settings of the print job but custom paper was specified using the printer driver or by print command, printing can proceed from the bypass tray with the job's settings applied.
Tray 1
Specify whether the paper size and type settings applied for Tray 1 are those specified using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
Driver/Command
Machine Setting(s)
Tray 2
Specify whether the paper size and type settings applied for Tray 2 are those specified using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
Driver/Command
Machine Setting(s)
Tray 3
Specify whether the paper size and type settings applied for Tray 3 are those specified using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
Driver/Command
Machine Setting(s)
Tray 4
Specify whether the paper size and type settings applied for Tray 4 are those specified using the control panel, printer driver, or print command.
Default: [Machine Setting(s)]
Driver/Command
Machine Setting(s)
Tray Switching
You can specify whether or not the machine automatically switches paper trays if paper of the specified size and type is not loaded in the driver-designated tray.
Default: [Off]
On
Off
Extend Auto Tray Switching
This setting enables the machine to switch paper trays automatically, regardless of whether the tray is manually or automatically selected.
Default: [Off]
On
Off
PCL Menu
You can set conditions when using PCL for printing.
Orientation
Select the page orientation.
Default: [Portrait]
Portrait
Landscape
Form Lines
Specify the number of lines per page between 5 to 128.
Default:
(mainly Europe and Asia)
64
(mainly North America)
60
The default paper size is used when the paper size is not specified in the print data.
Font Source
Specify the location of the default font.
Default: [Resident]
Resident
RAM
HDD
SD
SD Font Download
When you select [RAM], you can select only fonts downloaded to the printer RAM.
When you select [HDD], you can select only fonts downloaded to the hard disk.
When you select [SD Font Download], you can select only fonts downloaded to the SD card.
Font Number
Specify the ID of the default font you want to use.
Default: 0
0 to 63 (Resident)
1 to X (Download; "X" is the number of downloaded fonts)
Point Size
Specify the point size you want to use for the default font between 4 to 999.75 in 0.25 increments.
Default: 12.00 points
This setting is effective only for a variable-space font.
Font Pitch
Specify the number of characters per inch you want to use for the default font between 0.44 to 99.99 in 0.01 increments.
Default: 10.00 pitches
This setting is effective only for fixed-space fonts.
Symbol Set
You can specify the character set for the default font. Available sets are as follows:
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, ISO L6, ISO L9, PC-775, PC-8, PC-8 D/N, PC-850, PC-852, PC-858, PC8-TK, PC-1004, Win L1, Win L2, Win L5, Win Baltic, Desktop, PS Text, MS Publ, Math-8, PS Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, UCS-2, PC-864, Arabic-8, Win Arabic, PC-866, PC-866U, ISO Cyrillic, Win Cyrillic, PC-851, Greek-8, ISO Greek, PC-8 Greek, Win Greek, PC-862, Hebrew-7, Hebrew-8, ISO Hebrew
Default: [PC-8]
Courier Font
Select the type of courier font.
Default: [Regular]
Regular
Dark
Ext. A4 Width
Select whether or not to extend the width of the printable area of A4 sheets, by reducing side margins.
Default: [Off]
On
Off
Append CR to LF
Select whether or not to append a CR code to each LF code to print text data clearly.
Default: [Off]
On
Off
Resolution
You can specify the print resolution in dots per inch.
Default: [600dpi Standard]
600dpi Fast
600dpi Standard
PS Menu
You can set conditions when using PostScript for printing.
Job Timeout
You can specify how long the printer waits (in seconds) before canceling the current job when the job is interrupted while being processed.
Default: [Use Driver/Command]
Use Driver/Command
Use Machine Setting(s)
If you select Use Machine Setting(s), enter a value between 0 to 999. (Default: 0)
Wait Timeout
You can specify how long the printer waits (in seconds) before it cancels receiving a job when the printer cannot detect the end of the job.
Default: [Use Driver/Command]
Use Driver/Command
Use Machine Setting(s)
If you select Use Machine Setting(s), enter a value between 0 to 999. (Default: 300)
Data Format
Select the data format from Binary Data or TBCP.
This setting is ineffective when using a parallel or EtherTalk connection.
When using a parallel or USB connection, the print job is canceled if binary data is sent from the printer driver.
Default: [TBCP]
When using an Ethernet connection, the print job is canceled if:
The printer driver data format is TBCP and the data format selected using the control panel is Binary Data.
The printer driver data format is binary and the data format selected using the control panel is TBCP.
Resolution
Select the resolution.
Default: [600dpi Standard]
600dpi Fast
600dpi Standard
1200dpi
Color Setting
Specify the RGB setting.
Default: [Super Fine]
None
Fine
Super Fine
Color Profile
Specify the color profile.
Default: [Auto]
Auto
Presentation
Solid Color
Photographic
User Setting
Process Color Model
Specify the color model.
Default: [Color]
Color
Black and White
Orientation Auto Detect
Specify the orientation auto detect.
Default: [On]
On
Off
PDF Menu
You can set conditions when using PDF for printing.
Change PDF Password
Specify the password for the PDF file executing PDF Direct Print.
If you do not set a PDF password, this menu does not appear.
The password can be set using Web Image Monitor, but must be sent through the network. For increased security, use this menu on the control panel to set the password directly.
PDF Group Password
This setting is not available on this printer.
Reverse Order Printing
This setting enables the document starts printing from the last page. Use this function when prints come out face up in the output tray. This allows a printed document to be assembled in page order.
Default: [Off]
On
Off
Resolution
Specify the resolution for the PDF file executing PDF Direct Print.
Default: [600dpi Standard]
600dpi Fast
600dpi Standard
1200dpi
Color Setting
Specify the RGB setting for the PDF file executing PDF Direct Print.
Default: [Super Fine]
None
Fine
Super Fine
Color Profile
Specify the color profile for the PDF file executing PDF Direct Print.
Default: [Auto]
Auto
Presentation
Solid Color
Photographic
User Setting
Process Color Model
Specify the color model for the PDF file executing PDF Direct Print.
Default: [Color]
Color
Black and White
Orientation Auto Detect
Specify the orientation auto detect for the PDF file executing PDF Direct Print.
Default: [On]
On
Off