General Settings

You can select the type of plain paper.

• Tray 1 to 4, Bypass Tray

  Default: [Plain Paper 2]

  • Plain Paper 1

  • Plain Paper 2

You can select the letterhead printing mode.

• Tray 1 to 4, Bypass Tray

  Default: [Letterhead 2]

  • Letterhead 1

  • Letterhead 2

  • Letterhead 3

  • Letterhead 4

  • Letterhead 5

You can select the coated paper (glossy) setting mode.

• Tray 1 to 4, Bypass Tray

  Default: [Coated Paper (Glossy) 4]

  • Coated Paper (Glossy) 1

  • Coated Paper (Glossy) 2

  • Coated Paper (Glossy) 3

  • Coated Paper (Glossy) 4

  • Coated Paper (Glossy) 5

You can select the coated paper (glossy : thick) setting mode.

• Bypass Tray

  Default: [CoatedPaper(Glossy : Thick)1]

  • CoatedPaper(Glossy : Thick)1

  • CoatedPaper(Glossy : Thick)2

You can select the coated paper (matted) setting mode.

• Tray 1 to 4, Bypass Tray

  Default: [Coated Paper (Matted) 4]

  • Coated Paper (Matted) 1

  • Coated Paper (Matted) 2

  • Coated Paper (Matted) 3

  • Coated Paper (Matted) 4

  • Coated Paper (Matted) 5

You can select the coated paper (matted : thick) setting mode.

• Bypass Tray

  Default: [CoatedPaper(Matted : Thick)1]

  • CoatedPaper(Matted : Thick)1

  • CoatedPaper(Matted : Thick)2

You can select the waterproof paper setting mode.

• Tray 1 to 4, Bypass Tray

  Default: [Waterproof Paper 5]

  • Waterproof Paper 1

  • Waterproof Paper 2

  • Waterproof Paper 3

  • Waterproof Paper 4

  • Waterproof Paper 5

You can select the label paper setting mode.

• Tray 1 to 4, Bypass Tray

  Default: [Label Paper 6]

  • Label Paper 1

  • Label Paper 2

  • Label Paper 3

  • Label Paper 4

  • Label Paper 5

  • Label Paper 6

You can select the envelope setting mode.

• Tray 1 to 4, Bypass Tray

  Default: [Envelope 1]

  • Envelope 1

  • Envelope 2

  • Envelope 3

  • Envelope 4

Use this function to specify the timing to notify user when supplies need to be replaced. Settings can be made separately for photo conductor unit, intermediate transfer unit, or fusing unit.

• Photoconductor Unit

  Default: [Normal]

  • Notify Sooner

  • Normal

  • Notify Later

• Intermediate Transfer Unit

  Default: [Normal]

  • Notify Sooner

  • Normal

  • Notify Later

• Fusing Unit

  Default: [Normal]

  • Notify Sooner

  • Normal

  • Notify Later

You can specify whether or not to continue printing after the following components have exceeded their recommended service life.

• Drum Unit

• Transfer Unit

• Fusing Unit

Default: [Continue Printing]

• Continue Printing

• Stop Printing

You can select whether or not the amount of toner is displayed on the initial screen.

Default: [On]

• On

• Off

You can select whether or not to protect the menu settings. If you enable this setting, you must specify a protection level.

Default: [Level 2]

• Level 1

• Level 2

• Off

You can select whether or not to prohibit List/Test printing.

Default: [Off]

• On

• Off

You can specify the unit for measurement.

Default:

(mainly Europe and Asia)
[mm]

(mainly North America)
[inch]

• mm

• inch

You can select whether or not to enable the panel key sound.

Default: [On]

• On

• Off

You can select whether or not to sound the beeper when the printer has completed a warm-up process.

Default: [Off]

• On

• Off

You can specify the density of the display.

You can specify whether or not to scroll the display panel when the [ ] or [ ] key is held down. When you enable this setting, specify the scroll speed. (If repeat time is set to "Long", scroll speed becomes slow.)

Default: [Normal]

• Do not Repeat

• Normal

• Repeat Time: Medium

• Repeat Time: Long

Specify the function that is selected by default whenever the printer is turned on or leaves Energy Saver mode.

The order of the items on this menu reflects the order of the functions that appear when [Switch Functions] is pressed.

Default: [Printer]

• Printer

• Extended Features 1

• Extended Features 2

• Extended Features 3