This section explains about parameters that can be set on the paper input menu.
Paper Size: Bypass Tray
You can specify the paper size for Bypass Tray.
Default:
(mainly Europe and Asia)
A4
(mainly North America)
81/2 11
(mainly Europe and Asia)
A4, A5, A6, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., 81/2 14,
81/2 13, 81/2 11, 81/4 13, 8 13, 71/4 101/2, 51/2 81/2,
41/8 91/2, 37/8 71/2, 16K, Custom Size
(mainly North America)
81/2 14, 81/2 13, 81/2 11, 81/4 13, 8 13, 71/4 101/2,
51/2 81/2, 41/8 91/2, 37/8 71/2, A4, A5, A6, B5 JIS, B6 JIS,
C5 Env., C6 Env., DL Env., 16K, Custom Size
Paper Size: Tray 1 to 4
You can specify the paper size for Tray 1 to 4.
Default: [Auto Detect]
(mainly Europe and Asia)
Auto Detect, A4, A5, A6, B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env.,
81/2 14, 81/2 13, 81/2 11, 81/4 13, 8 13, 71/4 101/2,
51/2 81/2, 41/8 91/2, 37/8 71/2, 16K, Custom Size
(mainly North America)
Auto Detect, 81/2 14, 81/2 13, 81/2 11, 81/4 13, 8 13,
71/4 101/2, 51/2 81/2, 41/8 91/2, 37/8 71/2, A4, A5, A6,
B5 JIS, B6 JIS, C5 Env., C6 Env., DL Env., 16K, Custom Size
JIS stands for "Japanese Industrial Standard".
Paper Type: Bypass Tray
Default: [No Display (Plain Paper)]
For details about the types of paper that can be loaded in the Bypass Tray, see Hardware Guide.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Letterhead, Label Paper, OHP (Transparency), Envelope, Coated Paper (Glossy), Coated Paper(Glossy : Thick), Coated Paper (Matted), Coated Paper(Matted : Thick), Preprinted Paper, Thin Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Thick Paper 4, Waterproof Paper, +Custom 1, +Custom 2, +Custom 3, +Custom 4, +Custom 5, +Custom 6, +Custom 7, +Custom 8
Paper Type: Tray 1 to 4
Default: [No Display (Plain Paper)]
For details about the types of paper that can be loaded in each tray, see Hardware Guide.
Be sure to set a paper type using the control panel. If you do not set it, the printing result might not be proper.
Only installed trays appear on the display panel.
No Display (Plain Paper), Recycled Paper, Special Paper 1, Special Paper 2, Special Paper 3, Letterhead, Label Paper, Envelope, Coated Paper (Glossy), Coated Paper(Glossy : Thick), Coated Paper (Matted), Coated Paper(Matted : Thick), Preprinted Paper, Thin Paper, Middle Thick, Thick Paper 1, Thick Paper 2, Thick Paper 3, Waterproof Paper, +Custom 1, +Custom 2, +Custom 3, +Custom 4, +Custom 5, +Custom 6, +Custom 7, +Custom 8
Duplex Tray
You can set each tray for duplex printing. Only installed trays appear on the display panel.
Tray 1 to Tray 4, Bypass Tray
Default: [On]
On
Off
Auto Tray Select
You can select whether to assign each tray to automatically print the paper size and type set by printer driver.
Tray 1 to Tray 4
Default: [On]
On
Off
Bypass Tray
Default: [Off]
On
Off
When using custom size paper, if automatic tray selection is enabled, the size selected on the control panel has priority. If this setting is disabled, the size selected from the printer driver has priority.
Only installed trays appear on the display panel.
You can select multiple trays.
If you need to have a tray locked, you must select the tray using both printer driver and control panel.
Tray Priority
You can set a tray to be checked first when automatic tray selection is enabled from the printer driver. The tray selected here is used when no tray is selected for a print job.
Default: [Tray 1]
Only installed trays appear on the display panel.
It is recommended that you load paper of the size and orientation you use most frequently in the tray selected in this setting.