Skip header
 

Top Page > Software Guide > Printing Documents > Using the Virtual Printer > Adding a Virtual Printer

Adding a Virtual Printer

Use this procedure to add a virtual printer.

Important

  • Adding a virtual printer requires Administrators privilege. Log in using an account that has Administrators privilege.

  • The following Virtual Printer protocols are available: "TCP/IP (Unspecified, Normal)", "TCP/IP (Unspecified, Priority)", "TCP/IP (DIPRINT)", "TCP/IP (RHPP)", "AppleTalk", and "NetWare".

1Log in to Web Image Monitor as an administrator.

2In the menu area, click [Configuration], and then click [Virtual Printer Settings] in the "Printer" category.

A list of the available virtual printers appears.

3Click [Add].

The screen for adding virtual printers appears.

4In [Virtual Printer Name], enter a name for the new printer, and then select the protocol in the [Protocol] list.

5Click [OK].

The virtual printer is added.

Note

  • If you select [TCP/IP (DIPRINT)], [AppleTalk], or [NetWare] in the [Protocol] list, you cannot specify a virtual printer name.

  • You can specify a virtual printer name using up to 47 characters.

  • You can add up to 50 virtual printers. After 50 virtual printers have been added, [Add] will no longer be displayed.

  • For details about login user names and passwords, see "Using Web Image Monitor".

Reference