Plain paper

Paper thickness

61 to 90 g/m² (16 to 24 lb.)

Printer setup

Press the [Menu] key, select [Paper Input], [Paper Type: (tray name)], and then select [No Display (Plain Paper)].

Printer driver setup

Click [Plain & Recycled] or [Plain (81 to 90 g/m2)] in the "Paper Type:" list.

Supported paper feed tray

Any input tray can be used.

Paper capacity

• Tray 1: 550

• Tray 2,Tray 3, Tray 4 (Paper feed unit): 550

• Bypass Tray: 100

Make sure paper is not stacked higher than the upper limit mark ( ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray.

Duplex printing

Supported

Maintenance

• [Plain Paper 1]: 61 to 80 g/m² (16 to 21 lb.)

• [Plain Paper 2]: 81 to 90 g/m² (22 to 24 lb.)

Default: [Plain Paper 2]

If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel:

• Press the [Menu] key, select [Maintenance], [General Settings], and then select [Plain Paper Setting]. Select the paper tray, and then select [Plain Paper 1] or [Plain Paper 2].

When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print problem occurs.