Setting Items of WPA/WPA2

Start your Web browser.
Enter "http://(printer's IP address)/" in the address bar of a Web browser.
Enter your user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
Click [Configuration], and then click [Wireless LAN Settings] in the "Interface" area.
Select [Infrastructure Mode] in "Communication Mode".
Enter the alphanumeric characters (a-z, A-Z, or 0-9) in [SSID] according to the access point you want to use.
Select [WPA] in "Security Method".
Select [TKIP] or [CCMP (AES)] in "WPA Encryption Method" according to the access point you want to use.
Select [WPA] or [WPA2] in "WPA Authentication Method".
Click [OK].
Click [Logout].
Quit the Web browser.

You can select [Certificate 1] or [Certificate 2] in the "Device Certificate" window. Note that if you select [Certificate 1] in the "Device Certificate" window, you must select [Certificate 1] in the "IEEE 802.11a" list in the "Certification" window.
If there is a problem with settings, you might not be able to communicate with the printer. To identify the problem, print a network summary.
If you cannot identify the problem, reset the printer interface to normal, and then repeat the procedure from the beginning.