



	Manuals Contents Previous Next

Top Page > Hardware Guide > Setting Up the Printer > Turning the Printer's Power On and Off > Turning on the Power

Turning on the Power

Use this procedure to turn on the printer's power.

Make sure the power cord is plugged securely into the wall outlet.
Turn the power switch off when plugging and unplugging the power plug.

Make sure the power switch is set to " Off".
Connect the power cord to the connector of the printer.
Insert the plug of the power cord securely into the wall outlet.
Turn the power switch to " On".
The power indicator on the control panel lights up.

Wait while the toner loads. To avoid malfunction, do not turn off the power while "Loading Toner" is shown on the display.
Wait until "Ready" appears on the display panel.
The printer may make a noise while initializing. This noise does not indicate a malfunction.