Skip header
 

Top Page > Hardware Guide > Maintaining the Printer > Cleaning the Registration Roller

Cleaning the Registration Roller

CAUTION

  • The inside of the machine could be very hot. Do not touch the parts with a label indicating the “hot surface”. Otherwise, an injury might occur.

Important

  • Do not use chemical cleaners or organic solvents such as thinners or benzine.

  • Do not touch the belt of the roller when cleaning.

  • Clean the registration roller if dots (caused by specks of paper stuck to the roller) appear on printed OHP transparencies.

1Turn off the power, and then unplug the power cord.

2Carefully open the printer's front cover by pulling the left and right side levers.

Printer illustration

3Set the registration roller as shown.

Registration roller illustration

4Clean the registration roller by applying a soft damp cloth while turning it.

Registration roller illustration

5Carefully close the front cover.

6Plug in the power cord, and then turn on the power.