Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

Top Page > Maintaining > Performing Maintenance using the Control Panel (Maintenance Menu) > Nozzle Check

Nozzle Check

Follow the procedure below to check whether the print head nozzles are clogged up or not by printing a nozzle check test pattern.

  1. Press the [Menu] key.

    Menu key illustration

  2. Press the [Up arrow key] or [Down arrow key] key to display [Maintenance], and then press the [#Enter] key.

    Menu:               
     Maintenance        

  3. Press the [Up arrow key] or [Down arrow key] key to display [Nozzle Check], and then press the [#Enter] key.

    Maintenance:        
     Nozzle Check       

  4. Press the [#Enter] key.

    Press # to          
    print pattern       

    A test pattern is printed.

  5. Press the [Online] key.

    The initial screen appears.

  6. Check the printed test pattern.

    Normal

    Illustration of Nozzle Check

    When print heads are clogged

    Illustration of Nozzle Check

TopPreviousNext
Copyright (C) 2008-2011