Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

Top Page > Maintaining > Performing Maintenance using the Control Panel (Maintenance Menu) > Setting the Date and Time > Date Setting

Date Setting

  1. Press the [Menu] key.

    Menu key illustration

  2. Press the [Up arrow key] or [Down arrow key] key to display [Maintenance], and then press the [#Enter] key.

    Menu:               
     Maintenance        

  3. Press the [Up arrow key] or [Down arrow key] key to display [Date/Time], and then press the [#Enter] key.

    Maintenance:        
     Date/Time          

  4. Press the [Up arrow key] or [Down arrow key] key to display [Date Setting], and then press the [#Enter] key.

    Date/Time:          
     Date Setting       

  5. Press the [Up arrow key] or [Down arrow key] key to set the date, and then press the [#Enter] key.

    model27

    Date Setting:       
     30/ 8/2008         

    model17

    Date Setting:       
      8/30/2008         

  6. Press the [Online] key.

    The initial screen appears.

TopPreviousNext
Copyright (C) 2008-2011