Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

Quick Install for Network

Follow the procedure below to install the printer driver, User Guide, and DeskTopBinder - SmartDeviceMonitor for Client.

Important

Notes on the Installation (Network Connection)

If the message "Digital Signature Not Found" or the [Software Installation], [Hardware Installation] or [Windows can't verify the publisher of this driver software] dialog box appears:

  1. Click [Yes], [Continue Anyway] or [Install this driver software anyway] to continue the installation.

  1. Start Windows, and insert the provided CD-ROM into the CD-ROM drive.

    Quit all other applications currently running.

  2. Select a language for the interface, and then click [OK].

  3. Click [Quick Install for Network].

  4. Read the entire license agreement carefully. If you accept its terms, click [I accept the agreement.], and then click [Next >].

  5. The search for the network printer starts. If the selection dialog box appears, select the model of printer you want to use, and then click [Install].

    Installation starts.

    If the [Software Installation], or [Windows can't verify the publisher of this driver software] dialog box appears, see "Notes on the Installation".

    If the printer cannot be found and only "Printer Port" appears in the printer selection dialog box, either the printer's IP address has not been specified or the computer and printer are not on the same network segment. Before installing the software, check the printer's IP address and the network topology. Otherwise, select "Printer Port" in the dialog box, and then install the printer driver. If you do this, SmartDeviceMonitor for Client will not be simultaneously installed, so install it afterwards, and then configure the port.

    If the message "Digital Signature Not Found" or [Hardware Installation] dialog box appears, see "Notes on the Installation".

  6. Click [Finish].

    The printer driver, User Guide, and DeskTopBinder - SmartDeviceMonitor for Client are now installed.

Note