The area where the printer is to be placed

Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine.

Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.

Keep the machine away from humidity and dust. Otherwise a fire or an electric shock might occur.

Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur.

Do not place heavy objects on the machine. Doing so can cause the machine to topple over, possibly resulting in injury.

Make sure the room where you are using the machine is well ventilated and spacious. Good ventilation is especially important when the machine is used heavily.

Do not obstruct the machine's vents. Doing so risks fire caused by overheated internal components.

Choose a flat, stable area to install the machine.

The surface should be level within two degrees, left to right and front to back.
To prevent condensation, install the machine in an area where temperature and humidity conditions do not exceed those indicated in the diagram below.
The machine may cease to print if these limitations are exceeded.
- White area: Permissible Range
- Blue area: Recommended Range
The diagram below shows the ideal clearance for loading paper, replacing print cartridges, and removing jammed paper
a. If you attach the bypass tray (option), provide additional clearance of 29 cm (11.5 inches).