Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N/GX e7700N
ContentsPreviousNextHelp

Machine Body

This is a front view of the printer.

printer body illustration numbered callout illustration

printer body illustration numbered callout illustration

  1. Top Cover

    Normally, keep this cover closed. If you cannot locate paper jams, or jammed paper cannot be removed easily, you can check the condition of paper from the top of the printer.

  2. Output Ramp

    Prints are delivered on the output ramp.

  3. Output Ramp Extension

    Pull out when using large paper to keep the printed paper from falling.

  4. Paper Tray Cover Extension (GX e7700N only)

    Pull out this cover when using the tray extension, so you can prevent the tray from being dusty.

  5. Tray 1

    Load paper here.

    If you want to print on paper larger than A4 or letter size, pull the tray extension out.

  6. Envelope Selector

    For envelopes, set the lever to the rear positionEnvelope illustration; for everything else, set the lever to the forward positionPaper illustration.

  7. Print Cartridge (black)

  8. Print Cartridge (cyan)

  9. Print Cartridge (magenta)

  10. Print Cartridge (yellow)

  11. Ink Collector Unit

  12. Right Front Cover

    During normal usage, keep this cover closed. Open this cover only when you need to install or replace an ink cartridge or the ink collector unit.

  13. Paper Feed Wheel

    Use to wind out paper jammed around the guide board.

  14. Left Cover

    Normally, keep this cover closed. Open this cover when you need to turn the paper feed wheel.