Printing with Tray 2/Tray 3 with a Macintosh

This section explains how to load paper in tray 2/tray 3 and print on it.

Paper lighter than 157 g/m² (297.6 lb.) can be loaded into tray 1. To use Paper lighter than that, click [Plain] in the [Paper type:] pop-up menu.

Open the [Setup] settings.
Select the paper type from the [Setup] settings.
Make sure [Tray 2]/[Tray 3] is selected from the [Paper Feed] settings.
Slide the paper guide into position according to the paper size.
Insert a sheet of paper into tray 2/tray 3 with the print side face down.
Insert the sheet straight into tray 2/tray 3.
Make print settings, and then click [Print].

To use tray 2/tray 3, click the [Driver] tab in the [Printer Info] dialog box, and then select the [Tray 2]/[Tray 3] from the pop-up menu. To display the [Printer Info] dialog box, display the [Print & Fax], double-click the printer from the printer list, and then click [Info] on the toolbar.
Under Mac OS X 10.3.x - 10.4.x, to use tray 2/tray 3, select the [Installable Options] in the [Printer Info] dialog box, and then select options. To display the [Printer Info] dialog box, display the [Printer List], and then click [Show Info] on the [Printers] menu.

For details about opening the [Setup] or [Paper Feed] setting, see Displaying the Print dialog on a Macintosh.
For details about handling paper, see Loading Paper.
For details about the number of sheets that can be loaded in tray 2/tray 3, see Loading Paper.